Home>Products>Bearings Grease>LHMT68/EML125 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils
LHMT68/EML125 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils
category
Bearings Grease
SKF LHMT68/EML125 Bearing SPECIFICATIONS
- SKF
LHMT68/EML125
- 500
- 32
- 265–295
- ‘M’
- –20 to +120 °C (–5 to +250 °F)
- >180 °C (>355 °F)
- 2 max. at 100 °C (210 °F)
- LGEM 2/SD250
-
NTN BEARING-Philippines LTD2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
LHMT68/EML125 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils Information techniques
- 500
- 32
- 265–295
- ‘M’
- –20 to +120 °C (–5 to +250 °F)
- >180 °C (>355 °F)
- 2 max. at 100 °C (210 °F)
- LGEM 2/SD250
- LGEM 2/SD125
- 2
- Rolling element bearings running at low speed and very high loads; Jaw crushers; Track laying machines; Lift mast wheels; Building machines such as mechanical rams, crane arms and crane hooks;
- LAGD 125/EM2
- TLSD 125/EM2
- TLSD 250/EM2
- High oxidation stability; Molybdenum disulphide and graphite provide lubrication even if the oil film breaks down; Rolling element bearings running at low speed and very high loads; Jaw crushers;
- LAGD 60/EM2
- LGEM 2/0.4
- KPF2K-20
- Mineral
- LGEM 2/180
- 5 years
- LGEM 2/(pack size)
- LGEM 2/18
- Lithium/calcium
- Designation
- LGEM 2/5
- Black
- 1 max.
- 0–0
- 0–0 *
- 1,2 max.
- Pass at 100 °C (210 °F)
- 325 max.
- 1–5
- 3 400 min.
- 345 max.
SKF LHMT68/EML125 LHMT68/EML125 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils Technology
Getting Started LHMT68/EML125 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils guide | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | m | W | D | B | H | t | Z | |
ZR3.20.1250.400-1SPPN | ISB | - | 12 mm | - | 1397 mm | - | 132 mm | - | 87 mm |
ARN65125 | NTN | - | - | - | 125 mm | - | - | - | - |
ZAXFM1255 | INA | 0,05 mm / Axial runout accuracy | 160 g / Weight | 3 mm / Grub screw to DIN 913 | 55 mm / The bearing outer ring is blue anodised | 20 mm | 35 mm | 24 mm | - |
125TAD20 | NACHI | - | - | - | 180 mm | - | - | - | - |
125RIF550 | Timken | - | - | - | 419,1 mm | 50,8 mm | - | - | - |
125RIF551 | Timken | - | - | - | 482,6 mm | 66,67 mm | - | - | - |
125RIJ550 | Timken | - | - | - | 419,1 mm | 50,8 mm | - | - | - |
ZGB 110X125X100 | INA | - | - | - | 125 mm | 100 mm | - | - | - |
ZARN 65125 L TN | NBS | - | - | - | 125 mm | 17,5 mm | - | - | - |
ZARN 65125 TN | NBS | - | - | - | 125 mm | 17,5 mm | 82 mm | - | - |
125RIJ551 | Timken | - | - | - | 482,6 mm | 66,67 mm | - | - | - |
LAGD125/LG302 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | ase oil viscosity 40 °C, mm²/s:500; ase oil viscosity 100 °C, mm²/s:32; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Mechanical stability V2F test:‘M’; Operating temperature range:–20 to +120 °C (–5 to +250 °F); Dropping point DIN ISO 2176:>180 °C (>355 °F); Copper corrosio DIN 51 811:2 max. at 100 °C (210 °F); TLSD series 250 ml refill:LGEM 2/SD250; TLSD series 125 ml refill:LGEM 2/SD125; NLGI consistency class:2; Typical applications:Rolling element bearings running at low speed and very high loads; Jaw crushers; Track laying machines; Lift mast; LAGD series 125 ml:LAGD 125/EM2; TLSD series 125 ml:TLSD 125/EM2; TLSD series 250 ml:TLSD 250/EM2; Features & benefits:High oxidation stability; Molybdenum disulphide and graphite provide lubrication even if the oil film breaks down;; LAGD series 60 ml:LAGD 60/EM2; 420 ml cartridge:LGEM 2/0.4; DIN 51825 code:KPF2K-20; ase oil type:Mineral; 180 kg drum:LGEM 2/180; Shelf life:5 years; Designatio:LGEM 2/(pack size); 18 kg pail:LGEM 2/18; Thickene:Lithium/calcium; Packsize:Designation; 5 kg ca:LGEM 2/5; Colou:Black; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; Corrosion protectio Emcor: – standard ISO 11007:0–0; Corrosion protectio Emcor: – water washout test:0–0 *; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,2 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 100 °C (210 °F); Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:325 max.; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; EP performance 4–ball test, welding load DIN 51350/4, N:3 400 min.; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:345 max.; |
LAGD125/HFP12 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | ase oil viscosity 40 °C, mm²/s:500; ase oil viscosity 100 °C, mm²/s:32; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Mechanical stability V2F test:‘M’; Operating temperature range:–20 to +120 °C (–5 to +250 °F); Dropping point DIN ISO 2176:>180 °C (>355 °F); Copper corrosio DIN 51 811:2 max. at 100 °C (210 °F); TLSD series 250 ml refill:LGEM 2/SD250; TLSD series 125 ml refill:LGEM 2/SD125; NLGI consistency class:2; Typical applications:Rolling element bearings running at low speed and very high loads; Jaw crushers; Track laying machines; Lift mast; LAGD series 125 ml:LAGD 125/EM2; TLSD series 125 ml:TLSD 125/EM2; TLSD series 250 ml:TLSD 250/EM2; Features & benefits:High oxidation stability; Molybdenum disulphide and graphite provide lubrication even if the oil film breaks down;; LAGD series 60 ml:LAGD 60/EM2; 420 ml cartridge:LGEM 2/0.4; DIN 51825 code:KPF2K-20; ase oil type:Mineral; 180 kg drum:LGEM 2/180; Shelf life:5 years; Designatio:LGEM 2/(pack size); 18 kg pail:LGEM 2/18; Thickene:Lithium/calcium; Packsize:Designation; 5 kg ca:LGEM 2/5; Colou:Black; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; Corrosion protectio Emcor: – standard ISO 11007:0–0; Corrosion protectio Emcor: – water washout test:0–0 *; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,2 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 100 °C (210 °F); Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:325 max.; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; EP performance 4–ball test, welding load DIN 51350/4, N:3 400 min.; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:345 max.; |
LAGE125/WA2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | ase oil viscosity 40 °C, mm²/s:500; ase oil viscosity 100 °C, mm²/s:32; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Mechanical stability V2F test:‘M’; Operating temperature range:–20 to +120 °C (–5 to +250 °F); Dropping point DIN ISO 2176:>180 °C (>355 °F); Copper corrosio DIN 51 811:2 max. at 100 °C (210 °F); TLSD series 250 ml refill:LGEM 2/SD250; TLSD series 125 ml refill:LGEM 2/SD125; NLGI consistency class:2; Typical applications:Rolling element bearings running at low speed and very high loads; Jaw crushers; Track laying machines; Lift mast; LAGD series 125 ml:LAGD 125/EM2; TLSD series 125 ml:TLSD 125/EM2; TLSD series 250 ml:TLSD 250/EM2; Features & benefits:High oxidation stability; Molybdenum disulphide and graphite provide lubrication even if the oil film breaks down;; LAGD series 60 ml:LAGD 60/EM2; 420 ml cartridge:LGEM 2/0.4; DIN 51825 code:KPF2K-20; ase oil type:Mineral; 180 kg drum:LGEM 2/180; Shelf life:5 years; Designatio:LGEM 2/(pack size); 18 kg pail:LGEM 2/18; Thickene:Lithium/calcium; Packsize:Designation; 5 kg ca:LGEM 2/5; Colou:Black; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; Corrosion protectio Emcor: – standard ISO 11007:0–0; Corrosion protectio Emcor: – water washout test:0–0 *; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,2 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 100 °C (210 °F); Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:325 max.; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; EP performance 4–ball test, welding load DIN 51350/4, N:3 400 min.; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:345 max.; |
LAGD125/HFP15 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | ase oil viscosity 40 °C, mm²/s:500; ase oil viscosity 100 °C, mm²/s:32; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Mechanical stability V2F test:‘M’; Operating temperature range:–20 to +120 °C (–5 to +250 °F); Dropping point DIN ISO 2176:>180 °C (>355 °F); Copper corrosio DIN 51 811:2 max. at 100 °C (210 °F); TLSD series 250 ml refill:LGEM 2/SD250; TLSD series 125 ml refill:LGEM 2/SD125; NLGI consistency class:2; Typical applications:Rolling element bearings running at low speed and very high loads; Jaw crushers; Track laying machines; Lift mast; LAGD series 125 ml:LAGD 125/EM2; TLSD series 125 ml:TLSD 125/EM2; TLSD series 250 ml:TLSD 250/EM2; Features & benefits:High oxidation stability; Molybdenum disulphide and graphite provide lubrication even if the oil film breaks down;; LAGD series 60 ml:LAGD 60/EM2; 420 ml cartridge:LGEM 2/0.4; DIN 51825 code:KPF2K-20; ase oil type:Mineral; 180 kg drum:LGEM 2/180; Shelf life:5 years; Designatio:LGEM 2/(pack size); 18 kg pail:LGEM 2/18; Thickene:Lithium/calcium; Packsize:Designation; 5 kg ca:LGEM 2/5; Colou:Black; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; Corrosion protectio Emcor: – standard ISO 11007:0–0; Corrosion protectio Emcor: – water washout test:0–0 *; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,2 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 100 °C (210 °F); Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:325 max.; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; EP performance 4–ball test, welding load DIN 51350/4, N:3 400 min.; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:345 max.; |
LAGE125/HMT68 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | ase oil viscosity 40 °C, mm²/s:500; ase oil viscosity 100 °C, mm²/s:32; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Mechanical stability V2F test:‘M’; Operating temperature range:–20 to +120 °C (–5 to +250 °F); Dropping point DIN ISO 2176:>180 °C (>355 °F); Copper corrosio DIN 51 811:2 max. at 100 °C (210 °F); TLSD series 250 ml refill:LGEM 2/SD250; TLSD series 125 ml refill:LGEM 2/SD125; NLGI consistency class:2; Typical applications:Rolling element bearings running at low speed and very high loads; Jaw crushers; Track laying machines; Lift mast; LAGD series 125 ml:LAGD 125/EM2; TLSD series 125 ml:TLSD 125/EM2; TLSD series 250 ml:TLSD 250/EM2; Features & benefits:High oxidation stability; Molybdenum disulphide and graphite provide lubrication even if the oil film breaks down;; LAGD series 60 ml:LAGD 60/EM2; 420 ml cartridge:LGEM 2/0.4; DIN 51825 code:KPF2K-20; ase oil type:Mineral; 180 kg drum:LGEM 2/180; Shelf life:5 years; Designatio:LGEM 2/(pack size); 18 kg pail:LGEM 2/18; Thickene:Lithium/calcium; Packsize:Designation; 5 kg ca:LGEM 2/5; Colou:Black; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; Corrosion protectio Emcor: – standard ISO 11007:0–0; Corrosion protectio Emcor: – water washout test:0–0 *; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,2 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 100 °C (210 °F); Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:325 max.; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; EP performance 4–ball test, welding load DIN 51350/4, N:3 400 min.; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:345 max.; |
LAHD1000-1 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | ase oil viscosity 40 °C, mm²/s:500; ase oil viscosity 100 °C, mm²/s:32; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Mechanical stability V2F test:‘M’; Operating temperature range:–20 to +120 °C (–5 to +250 °F); Dropping point DIN ISO 2176:>180 °C (>355 °F); Copper corrosio DIN 51 811:2 max. at 100 °C (210 °F); TLSD series 250 ml refill:LGEM 2/SD250; TLSD series 125 ml refill:LGEM 2/SD125; NLGI consistency class:2; Typical applications:Rolling element bearings running at low speed and very high loads; Jaw crushers; Track laying machines; Lift mast; LAGD series 125 ml:LAGD 125/EM2; TLSD series 125 ml:TLSD 125/EM2; TLSD series 250 ml:TLSD 250/EM2; Features & benefits:High oxidation stability; Molybdenum disulphide and graphite provide lubrication even if the oil film breaks down;; LAGD series 60 ml:LAGD 60/EM2; 420 ml cartridge:LGEM 2/0.4; DIN 51825 code:KPF2K-20; ase oil type:Mineral; 180 kg drum:LGEM 2/180; Shelf life:5 years; Designatio:LGEM 2/(pack size); 18 kg pail:LGEM 2/18; Thickene:Lithium/calcium; Packsize:Designation; 5 kg ca:LGEM 2/5; Colou:Black; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; Corrosion protectio Emcor: – standard ISO 11007:0–0; Corrosion protectio Emcor: – water washout test:0–0 *; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,2 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 100 °C (210 °F); Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:325 max.; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; EP performance 4–ball test, welding load DIN 51350/4, N:3 400 min.; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:345 max.; |
LHSP38/0.015 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | ase oil viscosity 40 °C, mm²/s:500; ase oil viscosity 100 °C, mm²/s:32; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Mechanical stability V2F test:‘M’; Operating temperature range:–20 to +120 °C (–5 to +250 °F); Dropping point DIN ISO 2176:>180 °C (>355 °F); Copper corrosio DIN 51 811:2 max. at 100 °C (210 °F); TLSD series 250 ml refill:LGEM 2/SD250; TLSD series 125 ml refill:LGEM 2/SD125; NLGI consistency class:2; Typical applications:Rolling element bearings running at low speed and very high loads; Jaw crushers; Track laying machines; Lift mast; LAGD series 125 ml:LAGD 125/EM2; TLSD series 125 ml:TLSD 125/EM2; TLSD series 250 ml:TLSD 250/EM2; Features & benefits:High oxidation stability; Molybdenum disulphide and graphite provide lubrication even if the oil film breaks down;; LAGD series 60 ml:LAGD 60/EM2; 420 ml cartridge:LGEM 2/0.4; DIN 51825 code:KPF2K-20; ase oil type:Mineral; 180 kg drum:LGEM 2/180; Shelf life:5 years; Designatio:LGEM 2/(pack size); 18 kg pail:LGEM 2/18; Thickene:Lithium/calcium; Packsize:Designation; 5 kg ca:LGEM 2/5; Colou:Black; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; Corrosion protectio Emcor: – standard ISO 11007:0–0; Corrosion protectio Emcor: – water washout test:0–0 *; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,2 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 100 °C (210 °F); Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:325 max.; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; EP performance 4–ball test, welding load DIN 51350/4, N:3 400 min.; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:345 max.; |
LAGD125/FG202 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | ase oil viscosity 40 °C, mm²/s:500; ase oil viscosity 100 °C, mm²/s:32; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Mechanical stability V2F test:‘M’; Operating temperature range:–20 to +120 °C (–5 to +250 °F); Dropping point DIN ISO 2176:>180 °C (>355 °F); Copper corrosio DIN 51 811:2 max. at 100 °C (210 °F); TLSD series 250 ml refill:LGEM 2/SD250; TLSD series 125 ml refill:LGEM 2/SD125; NLGI consistency class:2; Typical applications:Rolling element bearings running at low speed and very high loads; Jaw crushers; Track laying machines; Lift mast; LAGD series 125 ml:LAGD 125/EM2; TLSD series 125 ml:TLSD 125/EM2; TLSD series 250 ml:TLSD 250/EM2; Features & benefits:High oxidation stability; Molybdenum disulphide and graphite provide lubrication even if the oil film breaks down;; LAGD series 60 ml:LAGD 60/EM2; 420 ml cartridge:LGEM 2/0.4; DIN 51825 code:KPF2K-20; ase oil type:Mineral; 180 kg drum:LGEM 2/180; Shelf life:5 years; Designatio:LGEM 2/(pack size); 18 kg pail:LGEM 2/18; Thickene:Lithium/calcium; Packsize:Designation; 5 kg ca:LGEM 2/5; Colou:Black; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; Corrosion protectio Emcor: – standard ISO 11007:0–0; Corrosion protectio Emcor: – water washout test:0–0 *; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,2 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 100 °C (210 °F); Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:325 max.; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; EP performance 4–ball test, welding load DIN 51350/4, N:3 400 min.; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:345 max.; |
LHMT68/EML125 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils Video
SKF LHMT68/EML125 INTERCHANGE
Bearings Grease Part series LHMT68/EML125 is a potential replacement for these common bearing part numbers:
LHMT68/EML125
LHMT68/EML125
LHMT68/EML125
LHMT68/EML125
LHMT68/EML125
LHMT68/EML125
LHMT68/EML125
LHMT68/EML125
Contact Us

- NTN BEARING-Philippines LTD
- AddressPhilippine Centre Condominium Corporation Sen. Philippines
- Phone(Working Time)+63-2-789-4497
- Fax
SKF LHMT68/EML125 Technical Articles
Can a bad wheel bearing make a clicking sound? |
Can I use wd40 to clean bearings? |
Can you use motor oil for skateboard bearings? |
Bearings Grease CATEGORIES
- 120x215x76 bearing
- 12x32x10 bearing
- 180x380x126 bearing
- 200x340x112 bearing
- 220x370x120 bearing
- 240x500x95 bearing
- 300x460x118 bearing
- 320x440x118 bearing
- 35x62x14 bearing
- 380x560x135 bearing
- 480x700x165 bearing
- 500x720x167 bearing
- 500x830x264 bearing
- 70x90x10 bearing
- 75x160x37 bearing
- 90x115x13 bearing
- 95x170x43 bearing
- ISO 281 Bearing
- 6802 Bearing
- c3 Bearing
- aisi 52100 Bearing
- Bearings Grease
- Slewing Bearing
- Double Row Double Row Bearings
- Double Direction Thrust Bearings
- Tapered Roller Bearings Double-Row
Customers Who Viewed SKF LHMT68/EML125 Bearing Also Viewed
LAGD125/FG202 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils
LGMT3/5 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils
PERMA-12 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils
LAGD125/LG302 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils
LAGD60/U SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils